No bite marks or scratchinng of sensitive components
PRECISION
# Low working height
# Positioning with no "kickback" effect
# Stable steel base with low center of gravity for stability
# Matt coated base for minimal glare
FLEXIBILITY
# Magnetic ball joints
# Sliding magnetic feets
# 14mm clamping opening
# Parallel jaws
Arrgh no aggressive alligators on deck

Almost perfect is not good enough!
Say goodbye to long wobbly arms with limited precison

FLEXIBLE POSITIONING
Hold almost any components where you want them
Easy set-up
Horizontal and stable - for soldering, measuring, microscopy, desoldering, gluing, painting or ....
Can it hold that?!
14 mm jaw opening and the narrow nose makes it easy to find a good spot to hold your components.
The clip does not chew your work, yet provides a firm grip thanks to the unique clip design with parallel spring loaded jaws.

Keep stuff in "order" while working with projects
Lean the back of the clip towards the base for a defined 90 degree position

Upside down ?
Position the clip upside down on the magnet feet for a semi-locked low mode.

Easy to store and transport
Most of us have limited space in your workshops - Omnifixo is easy to store and does not take unnecessary space when not in use and it is easy to bring with you for field work.
VIDEO - Standard mode
VIDEO - PCBA work modes
VIDEO - Extreme precision
VIDEO - SMD support
Technical data
> High tolerance brass bearings.
> Laser cut magnetic stainless steel.
> High friction/temp. silicone caps - 250 °C / 480 °F.
> Chrome coated carbon steel balls.
> N52 "neodymium" magnets.
> ABS plastics.
> 15N springs / EN 10270-1-SH.
> Stainless steel "buttons" - SUS430.
> Dimensions:Base 160 x 90 x 1 mm / (~6.3 x 3.5 x 0.04 ").
> Clip (with magnet) 51 x 42 x 15 mm / 2 x 1.65 x 0.59 inch.
> Weight 200g - Base and 4 x Clips
> Jaw gap - 14 mm/ 0.59 inch
Pat. pending technology